I. Technical Performance and Parameters

1. Power Supply: Single-phase three-wire, 220V±10% 50Hz
2. Device Capacity: <0.5KVA
3. Operating Environment: -10-55℃
4. Relative Humidity: <85% (25℃)
5. Power Monitoring System Configuration:
   ① 4-channel analog input (0-3V);
   ② 4-channel digital input (optically isolated);
   ③ 3-channel relay output (220V, 1A);
   ④ 2-channel DA output (0-3V);
   ⑤ Standard Ethernet interface (with LED indicator for operating status);
   ⑥ RS485 interface and CAN interface (dedicated isolation module);
   ⑦ 4-digit LED display;
   ⑧ ARM simulation and download port;
   ⑨ USB 2.0 interface (RS232 interface);
6. Connects to a serial port-based wireless module, which is replaceable (with antenna, industrial grade);
7. Host PC Ethernet monitoring program.

II. Equipment Configuration

1. Programmable Logic Controller (1214C Transistor)
2. MCGS 7-inch Touchscreen (TPC-7062KX)
3. Frequency Inverter (V20-0.37KW)
4. Programmable Logic Controller Basic Instruction Programming Practice Module
5. Traffic Light PLC Automatic Control Experiment Module
6. Fully Automatic Washing Machine PLC Automatic Control Experiment Module
7. LED PLC Automatic Control Experiment Modules:
8. Three-Story Elevator PLC Automatic Control Experiment Module
9. Artistic Lighting Design PLC Automatic Control Experiment Module
10. Star-Angle Start PLC Automatic Control Experiment
11. Unmanned Vending Machine PLC Automatic Control Experiment
12. Motor Automatic Control Demonstration Board
13. Water Tower Automatic Water Supply Experiment
14. Automatic Material Feeding and Loading Experiment
15. Relay Control Experiment
16. Quiz Buzzer Control Experiment
17. Motor Guide Rail, Optical Encoder Speed ​​Measurement System and Digital Tachometer
18. Training Wires
19. Training Manual
20. Dedicated Programming Cable
21. AC Power Cord
22. Power Module (with Safety Protection Module)